Personalized advice

Our staff has years of experience with ant care. Don't hesitate to ask for our help, free of charge!

Kwaliteit

Al our products are made out of qualitative materials, are tested rigorously and continuously improved.

Healthy Ants

Twoo weeks of observation before our ants are sold. Good health guaranteed!

Acrylic ant nest size 2

19,99

Discover the wonderful world in your ant’s nest with this crystal clear acrylic nest! It has two humidification chambers with sponge to ensure slow release of moisture. As a result, you will have to moisten your nest less quickly. This 10×7 cm nest contains 5 chambers. It also includes an opening with a diameter of 8mm to which a hose can be connected.

Availability: In stock

More information

Discover the wonderful world in your ant’s nest with this crystal clear acrylic nest! It has two humidification chambers with sponge to ensure slow release of moisture. As a result, you will have to moisten your nest less quickly. The humidification chamber can be refilled via a small opening at the top (easy to fill with a pipette or syringe). In addition, this set is easy to clean and re-use thanks to its detachable design. Only cleaning with soap and water is recommended. This 10×7 cm nest contains 5 chambers. It also includes an opening with a diameter of 8mm to which a hose can be connected.

Dimension

10x7x3 cm (outer edge), Inside of nest is 12mm high

Material

Clear acryl

Instructions

Nests are shipped assembled. All our nests have a humidification system. A syringe is supplied with each nest that can be used to refill the water reservoir.

Acrylic nest

Our acrylic nests have one or more moisture chambers with a sponge. This absorbs the water and releases it slowly to provide the nest with moisture for a longer period of time. At the top of each moisture chamber there is a small opening in which you can add water to moisten the nest again. After a long period of drying (and therefore also during the first use) it is sometimes more efficient to open the nest, remove the sponge and immerse it in water for a while.

After adding water, it will be absorbed between the acrylic plates by capilarity and thus spread throughout the nest.

The nest can be taken apart by removing the screws. You can do this by loosening the nuts at the bottom.

3D printed nest

There are two types of 3D print nests.

The first option is the mushroom nests. These nests are on a water reservoir. The water reservoir can be refilled on the side through the opening provided.

The bottom of the nest contains an opening in which the so-called “mushroom plug” is placed.

This plug just fits through the opening and extends to the bottom of the water reservoir. This draws moisture from the water reservoir upwards, so that the nest is moistened and ants also have access to it.

The second kind, just like the acrylic nests, has a moisture chamber. This is connected to the nest by a grid. After adding cotton wool or a sponge, this room can be moistened (photos not available at the moment).

0

Scroll to Top

Bedankt!

Subscribe for our newsletter!

Curious about the latest developments in our shop, product updates or new stock? Then subscribe to our newsletter and enjoy exclusive offers!